Japanese Suehiro Gouge Whetstone - 280 Grit
Japanese Suehiro Gouge Whetstone - 280 Grit
Japanese Suehiro Gouge Whetstone - 280 Grit. Tapered whetstone is designed to sharpen implements from gouging tools to carving knives. Designed for rounded blades of various sizes. Tapered Japanese Waterstone. Model 2HS-1. 4966684065505. Made in Japan. Coarse grit. Includes an eraser for removing grime.
Made in Japan
Suehiro Model No. 2HS-1
Special whetstone for gouges & carving knives
280 Grit
6 Long x 2-1/4 Wide x 1-1/4 Thick (152 mm x 55 mm x 31 mm)
Includes an eraser for removing grime
Product Description
Specs
These Japanese tapered whetstones are designed to sharpen implements from gouging tools to carving knives. They accommodate rounded blades of various size & surface area. Both sides of the whetstone can use, enable both the inner & outer surfaces of the blade to be sharpened.
Use these grinders in the following order: Coarse Whetstone (#280), Medium Whetstone (#1000) See here, Super Fine Finishing Whetstone (#4000) See here. If there is no blade chipping or blade spilling, medium to finer finishing alone is sufficient.
Just sprinkle water before using to achieve a smooth surface. While the qualities of slicked-stone sharpening have been improved, the waterstone's resistance to wear is greater than before. Made in Japan.
Product
Size of Stone
Model #
Part #
Japanese Suehiro Gouge Whetstone - 280 Grit
6 Long x 2-1/4 Wide x 1-1/4 Thick (152 mm x 55 mm x 31 mm)
2HS-1
065505
Suehiro Japanese Whetstones – ProTooling
Suehiro #100 Grit Sharpening Stone Fixer 1B005 — MTC Kitchen
Whetstones for Carving Knives
Japanese Suehiro Gouge Whetstone - 4000 Grit
NEW CERAX Suehiro Corporation
Naniwa Sharpening Stone Fixer — MTC Kitchen
Sharpen your favorite gouge like never before. These special slip stone accommodates most gouge shapes and sizes. The stones are even soft enough to shape as needed. Use both sides of this stone to hone both sides of your gouge. Typically the ground edge is the one used to sharpen - the smooth edge is honed only at the very end to remove the bur.
Cone Slip Stone
Suehiro Whetstone for Gouges chisels 末広 丸刃用砥石 #280 #1000 #4000 For Gou – YAMASUKE KurashigeTools
Super Fine Finishing Whetstone grit #20000 Whetstone Size 8.07×2.87×0.79 in Whetstone Surface Restorer, “Dual Cleaner” (Included) This well-made
SUEHIRO GMN200 Whetstone GOKUMYO Series #20000 Japanese Knife Sharpner Super Finishing Stone